extend your senses
TM 050A
diameter 6 mm, up to 350 °C

TM 050A
diameter 6 mm, up to 350 °C

TM 050A
diameter 6 mm, up to 350 °C






These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the temperature of gaseous or solid substances. The maximum temperature range of use of the sensors is 0 to 300 °C, 350 °C short-term. Used type of lead-in cable has glass fibre insulation and metal braiding, the sensors are not resistant to the penetration of moisture inside the case and are intended for use in dry conditions. The sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.



  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  


Technické parametry

Sensor typeTM 050A
Measuring range0 to 300 °C (350 °C short-term)
Type of sensing element*Pt 100, Pt 500, Pt 1000, TCK, TCJ
Ingress protectionIP 50 in accordance with EN 60529
Case materialstainless steel DIN 1.4301
Diameter of the case6 + 0,1 mm
Length of case L40, 60, 100 and 200 mm
Lead-in cablewith glass fibre insulation and metal braiding 2 x 0.22 mm2
with glass fibre insulation and metal braiding 4 x 0.22 mm2
Wire resistance0.161 Ω for 1 m of cable for 2-wire connection
Weight0.05 kg for 40 mm housing length and 1 m cable
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení


- variable stem design in the area - L length, case material
- accuracy class A in the range of -50 to 250 °C
- possibility of three or four-wire connection

Soubory ke stažení

K11.05en.pdf K11.05en.pdf


SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm

+420 571 625 571



Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | e9a66fd9-e427-457e-bad3-86b217b3af5d
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.