extend your senses
KOS
Thermocouple temperature sensors
with connector MINI

Thermocouple temperature sensors
with connector MINI

Thermocouple temperature sensors
with connector MINI
On request

BBB

--%>

These thermocouple temperature sensors with a connector MINI TC 02F and TC 02M are designed for temperature measurements of gaseous or liquid substances. Temperature range is up to 1 100 °C depending to the thermocouple type and to the production technology used. The temperature sensors with a connector consist of a thermocouple and connector, which is an integral part of the case. The temperature sensors with a connector meet ingress protection IP 50 in accordance with EN 60529, as amended.

The thermocouple temperature sensors with a connector are intended to be used in operation in chemically non-aggressive environment.

ACCESSORIES

  • connectors
  • screw with collet or cutting rings – if different lengths of stem immersion of the temperature sensor are set  

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  

 

Technické parametry

Sensor typeTC 02FTC 02M
Thermocouple type"J" and "K" (other on request), single and double
Ingress protectionIP 50 in accordance with EN 60529, as amended
Designjacketed thermocouple with insulated measuring point
Diameter of the jacket D1,5; 2; 3; 4,5 and 6 mm
Length of the measuring part Lfrom 20 to 300 mm as standardly, others on customer's requirements
Measuring range - on measuring point"K" type up to 1 100 °C - according to the diameter of measuring part
"J" type up to 700 °C
others depending on the type
Accuracy classstandardly 2 in accordance with EN 60584, as amended and DIN 43 710
Jacket materialInconel 2.4816 for TC "K", stainless steel DIN 1.4541 for TC "J"
Sensor bodyflexible, shapeable
Type of connectorfemalemale
Ambient temperature around connector-30 to 220 °C
Weight0.03 kg for housing length 100 mm and 1 m lead 

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

T03.03en.pdf T03.03en.pdf

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

80acd190-915b-44fc-a801-73d7e1601c1e

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 34848a57-4af7-4313-90d9-07f9c2e73111
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...