extend your senses
KOS
TG 90
-50 °C to 350 °C (400 °C short-term)

TG 90
-50 °C to 350 °C (400 °C short-term)

TG 90
-50 °C to 350 °C (400 °C short-term)

BBB

--%>

These resistance temperature sensors and thermocouple temperature sensors, are designed to measure temperature of gaseous substances.

To fasten the temperature sensor into a point to be measured, the moveable screws are used. The sensor design provides a very fast response time of the sensor to changes in temperature when the sensing element is in direct contact with a gas to be measured. Maximum temperature range of sensor use is -50 to 350 °C (400 °C for a short period). The range for each design variant is reduced with a type of the temperature sensing element and the supply cable. On the side of case transition to a cable, the temperature sensors meet ingress protection from IP 50 to IP 67 according to the EN 60529 standard as amended, depending on the supply cable variant. The measuring part meets ingress protection IP according to the EN 60529 standard, as amended.

The temperature sensors are intended for operation in chemically non-aggressive environment.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  

 

Technické parametry

Sensor type TG 90
Sensing element* all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, TC K, TC J, TC T and so on)
Case length L 60 to 200 mm
Case diameter 10 mm
Case material stainless steel DIN 1.4301
Supply cable variations / Temperature range
(can be limited by type of sensing element
– specified in manual)
PVC shielded -30 to 80 °C
PVC unshielded -40 to 105 °C
Silicone shielded -50 to 200 °C
Teflon shielded -50 to 250 °C
With fibreglass 0 to 400 °C (with metal braiding)
Ingress protection on cable site
IP 00
Insulation resistance (between case and sensor) > 200 MΩ at 500 VDC, 25 °C ± 3°C
Maximum permissible static pull on the supply cable 1 kg

*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

807249bf-4e74-49de-89a6-38b94c287262

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 33c4c684-d439-415c-99e4-09bc056bcd63
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...