extend your senses
TG 80, TG 81 and TG 82
diameter 8 mm, -50 °C to 400 °C

TG 80, TG 81 and TG 82
diameter 8 mm, -50 °C to 400 °C

TG 80, TG 81 and TG 82
diameter 8 mm, -50 °C to 400 °C
On request



These temperature sensors are primarily designed for temperature measurement of solid substances, but can also be used for temperature measurement of liquids or gaseous substances. To mount the sensor to the measuring point, a bayonet nut is used that is screwed on a spring. The combination of a bayonet nut, spring and corresponding bayonet connector can provide higher contact pressure of the sensor to the measuring point or correct any changes in the distance between the nut and measuring point during measurement. The maximum temperature range of the sensors is - 50 to 350 °C (short-term 400 ° C). The range for individual design variations is narrowed down by the type of temperature sensing element and supply cable. The sensors meet the level of protection from IP 50 to IP 67 according to EN 60529, as amended, depending on the type of lead-in cable. The sensors are designed to operate in a non-aggressive environment. The method of use must be chosen with regard to temperature and chemical resistance of the case and lead-in cable.



  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  

Technické parametry

Sensor typeTG 80TG 81TG 82
Case endstraightsemisphere R8apex 120°
Sensing element*all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, TC K, TC J, TC T and so on)
Case materialstainless steel DIN 1.4301
Diameter of case8 mm
Length of case10 to 85 mm (with addition of 15 mm for cable attachment)
Lead-in cable variations/
Temperature range
(can be limited by type of sensing element
– determine in documentation)
PVC shielded           -30 to 80 °C
PVC unshielded      -40 to 105 °C
silicone shielded      -50 to 200 °C
teflon shielded         -50 to 250 °C
with fibreglass
(with metal braiding) 0 to 350 °C (for short term)
Ingress protectionPVC and silicone cables IP 67
teflon cables                   IP 64
cables with glass fibre    IP 50
accordance with EN 60529, as amended
Material/Dimension of bayonet nutnickel-plated brass /L = 18 mm, inner Ø 15 mm
Material/Dimension of springstainless steel DIN 1.4301
/L = 200 mm, outer Ø 8 mm, Ø of wire 0.9 mm
Insulation resistance200 MΩ at 500 V DC
Maximum permissible static pull on the lead-in cable1 kg
Weight0.06 kg for 40 mm housing length and 1 m cable

*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení


  • possibility to encase two sensing elements
  • accuracy class A (with the exception of sensors Ni 10000/5000, Ni 10000/6180, T1 = Ni 2226, thermistor NTC 20kΩ)
  • encapsulation of other types of sensing elements (DALLAS, KTY, TSic, SMT, etc.)
  • optional design of case dimensions in terms of: diameter 8 to 10 mm, length L, case material, case end design
  • variable spring length

Soubory ke stažení

B02.04en.pdf B02.04en.pdf


SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm

+420 571 625 571



Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 64345876-be01-4e65-823a-c8d271a36cb1
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.