extend your senses
TG 6
thread M6, -30 °C to 200 °C

TG 6
thread M6, -30 °C to 200 °C

TG 6
thread M6, -30 °C to 200 °C






These resistance temperature sensors with a cable and thermocouple temperature sensors with a cable are designed to measure the surface temperature of solid substances. The maximum temperature range of use of the sensors is -30 to 200 °C and these limits must not be exceeded even for a brief period. The structure of the sensors, which includes an M6 thread, enable the measurement of solid substances right below the surface. The sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.



  • Manufacturer provides EU Declaratin of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  


Technické parametry

Sensor typeTG 6
Measuring range
-30 to 200 °C (can be limited by the sensing element, determine in documentation)
Type of sensing element*Pt, Ni, NTC, TCK, TCJ, TCT
Ingress protectionIP 67 in accordance with EN 60529, as amended
Thread / OKM 6 / OK 12
Case materialbrass
Length of thread
9 mm
Lead-in cable
shielded silicone 2 x 0.22 mm2
shielded silicone 4 x 0.15 mm2
Wire resistance
0.16 Ω for 1 m of cable for 2-wire connection
Time response
τ0.5 < 4 s (in flowing water at 0.2 m.s-1)
Maximum allowable
cable tension
1 kg
Weight0.05 kg for 1 m length
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení


  • variable thread design, or size
  • accuracy class A (with the exception of sensors Ni 10000/5000, Ni 10000/6180, T1 = Ni 2226, thermistor NTC 20 kΩ)
  • possibility of three or four-wire connection

Soubory ke stažení

K20.05en.pdf K20.05en.pdf

Related Products

TR141Ex serie
ATEX zone II

Detail Detail

TR 141 and TR 141B
dural or stainless steel, 0 °C to 400 °C

Detail Detail

TG 7
brass -50 °C to 200 °C

Detail Detail


SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm

+420 571 625 571



Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 2c286df5-063e-4e51-ae51-334a17afac68
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.