extend your senses
KOS
TG 50
-50 °C to 350 °C (400 °C short-term)

TG 50
-50 °C to 350 °C (400 °C short-term)

TG 50
-50 °C to 350 °C (400 °C short-term)
On request

BBB

--%>

These right-angle threaded resistance temperature sensors and thermocouple temperature sensors, are designed to measure surface temperature of solid substances.

Due to temperature sensor design, the cable is led out at right angle to measuring part of the sensor and it enables to measure temperature just below the surface. To fasten the right-angle temperature sensor into a point to be measured, the thread is used. Maximum temperature range of right-angle temperature sensor use is -50 to 350 °C (400 °C for a short period). The range for each design variant is reduced with a type of the temperature sensing element and the supply cable. The right-angle temperature sensors meet ingress protection from IP 50 to IP 67 according to the EN 60529 standard, as amended, depending on the lead-in cable variant.

The rectangular temperature sensors are intended for operation in chemically non-aggressive environment.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  

 

Technické parametry

Sensor typeTG 50
Sensing element*all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, TC K, TC J, TC T and so on)
Length of case L - measuring part15 to 200 mm
Diameter of case - measuring part6 mm
Case dimensionaccording to the dimensional draft
Case materialstainless steel DIN 1.4301
Thread / OKM8 x 1 / OK 12
Lead-in cable variations / Temperature range
(can be limited by type of sensing element
– determine in documentation)
PVC shielded          -30 to 80 °C
PVC unshielded      -40 to 105 °C
silicone shielded      -50 to 200 °C
teflon shielded         -50 to 250 °C
with fibreglass
(with metal braiding) 0 to 400 °C 
Ingress protection

IP 50 to IP 67 in accordance with EN 60529, as amended -according to the type of cable

Insulation resistance
200 MΩ at 500 VDC, 25 ± 3 °C
Maximum permissible static pull on the lead-in cable1 kg
Weight0.05 kg for 50 mm housing length and 1 m cable
*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

  • variable stem design - length L, diameter, case material, case ending
  • possibility to encase two sensing elements
  • accuracy class A (with the exception of sensors Ni 10000/5000, Ni 10000/6180, T1 = Ni 2226, thermistor NTC 20 kΩ)
  • encapsulation of other types of sensing elements (DALLAS, TSic, KTY, SMT, etc.)
  • variable spring lenght

Soubory ke stažení

P03.02en.pdf P03.02en.pdf

Related Products

TG 6
thread M6, -30 °C to 200 °C

Detail Detail

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

91d32378-6406-44ec-8045-d520b156577c

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 75504a46-3672-406d-a7b1-60019b4f5615
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...