SP014 - Adapter for external supply of IoT sensor

Nacházíte se:

On request

BBB

--%>

The SP014 adapter is designed to be used as an accessory for battery powered transducer with radio output to Sigfox net (Wx8xx series).

When installed in place of an existing battery, the transducer will be extended with an external power input. The transducer can then be powered from a 5V DC power adapter, an external large capacity battery, or a suitable solar battery system with a backup battery. The transducer with mounted adapter is designed for indoor or covered environment.

Technické parametry

Product type	SP014
Input voltage	3.6 V to 14.5 V DC (5 V by default)
Output voltage	3.6 V DC
Continuous output current	max. 1 mA at supply 14.5 V max. 7 mA at supply 5 V
Peak output current	max. 150 mA
Output current limitation	cca 300 mA
Continuous power dissipation	max. 10 mW
Own consumption at 20 μA	3 μA at supply > 3.6 V 25 μA at supply < 3.6 V (eg a discharged external battery)
Wx8xx transducer start delay	max. 10 s after power supply connection
Short circuit protection of output	yes
Thermal overload protection	yes
Reverse polarity protection	no
Power connector	coaxial 2.1 x 5.5 mm socket at cable approx. 20 cm long
IP protection	IP65, power connector IP20
Operating temperature	-20 to +50 °C (the supply cable must be secured against movement at an ambient temperature below 0 °C)
Maximum supply cable length	max. 10 m

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

Obrázek k produktu:

SP014 - Adapter for external supply of IoT sensor

Technické parametry

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

Spodní odkazy

Spodní odkazy

Spodní odkazy

Kontakty

Vaše firma s.r.o.

CONTACT

PRODUCTS

QUICK LINKS

NEWSLETTER