extend your senses
KOS
Non-flush inductive proximity switches
PDI diameter 6.5 mm 3wire

Non-flush inductive proximity switches
PDI diameter 6.5 mm 3wire

Non-flush inductive proximity switches
PDI diameter 6.5 mm 3wire

CONFIGURATOR

CONFIGURE AND REQUEST

21869
__KOUPIT__
__NABIDKA__
__JINY DOTAZ__

BBB

--%>

Inductive proximity switches are used for the monitoring of the presence or metal objects. Depending on the switch mode (normylly open/normally closed), the output closes or opens, when the conductive object approaching the active switching zone.

Operation - is maintenance-free. For a fault free operation it is however necessary to keep the following principles: Surfaces of the active switching zone have to be kept free, clean. It is necessary to prevent sediments and other foreign particles from touching and setting up the active surface of the sensor, especially when mounted in upright position (active surface upwards). High electromagnetic field intensity devices (e.g. radiophone) must not be used in the immediate vicinity of the sensors.

Connection of a switch to an electric circuit - Switch connectionmust meet the high protection standard required and resist the high operation temperatures. The proximity switches specified in this catalogue are delivered with 2 x 0.25 mm2, 3 x 0.25 mm2 or 4 x 0.25 mm2 PVC cable in length of 2 m. This type meets the IP 68 enclosure class. The quick-disconnect version is provided with the connector type complying with the IP 67 enclosure class.

Technické parametry

Technical parameters
Design
With cable With connector
Nominal sensing distance Sn 3 mm
Effective sensing distance Sr 2.4 - 3.6 mm
Case diameter 6.5 mm
Case material nickel plated brass
Mounting non-flush
Hysteresis Sa (0.01 - 0.15) x Sn
Nominal voltage Un 24 V DC
Supply voltage Uc 10 - 30 V DC
Supply current Ic < 10 mA
Output current Iz < 200 mA
Ambient temperature range T -25 °C to 70°C
Ingress protection
IP 68 IP 67
Connection type cable PVC 3 x 0.25 mm2 connector M8


Switching Frequency
Design With cable With connector
Normal 200 Hz
Slow 50 Hz


Order reference number
OUTPUT Spínací frekvence With cable With connector
NPN n.o. Normal PDI 063 311 PDI 063 411
Slow PDI 063 311 S PDI 063 411 S
NPN n.c.
Normal PDI 063 312 PDI 063 412
Slow PDI 063 312 S PDI 061 412 S
PNP n.o. Normal PDI 063 313 PDI 061 413
Slow PDI 063 313 S PDI 061 413 S
PNP n.c. Normal PDI 063 314 PDI 061 414
Slow PDI 063 314 S PDI 061 414 S

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

209.02en.pdf 209.02en.pdf

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

a1e04ad9-ee85-44b5-924f-0fb9cef5654e

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 61427f6a-3fd8-449f-ad5c-82ccd5bd69c2
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...