extend your senses
KOS
MULTILOGGER M1320 - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

MULTILOGGER M1320 - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

MULTILOGGER M1320 - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

CONFIGURATOR

CONFIGURE AND REQUEST

29901
__KOUPIT__
__NABIDKA__
__JINY DOTAZ__

BBB

--%>

Battery powered datalogger M1320 with 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.s portable device.

The Multilogger is a battery operated datalogger capable of measuring and recording sensor and electrical values through its inputs.
Datalogger can be connected to Ethernet. Then measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.

Included in delivery: 

  • M1320
  • Instruction Manual
  • Traceable Calibration Certificate
  • 3x Rechargeable Battery AA
  • Power Supply
  • USB Cable
  • Wall Holder
  • FREE Analytical Software COMET Vision

Accessories



Technické parametry

Temperature sensor External probe PT 1000
Measuring range  
-200 to +600 °C
Accuracy  ±0.2 °C (-200 to +100 °C);
±0.2 % from reading from +100 to +600 °C
Resolution  
0.1 °C


Temperature + humidity sensorExternal probe T + RH digi 
Measuring range  
according to the connected probe Digi/M
Accuracy  according to the connected probe Digi/M
Resolution  
0.1 °C


Dew point
Measuring range  
according to the connected probe Digi/M
Accuracy  according to the connected probe Digi/M
Resolution  
0.1 °C


DC Voltage 
Measuring range
0 to 10 V
Accuracy ±10 mV
Resolution
better than 100 µV


DC Current
Measuring range
0 to 20 mA
Accuracy ±20 µA
Resolution
better than 0,1 µA


Binary signal
Input voltage for level “switched on” 
<0,4 V/> 2 V
Minimum/maximum input voltage  0 V/+30 V DC
Impedance of the “switched on”
< 10 kOhm/> 300 kOhm


Counter input
Range of counter24 bit (16 777 215) the counter overflow can be allowed
Maximum input frequency 200 Hz


Datalogger typeM1320
Operating temperature 
-10 to +60 °C 
Channels 
2x external temperature probe or connectable temperature+humidity probe,
2x binary, counter, voltage and current input
Counted values
dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory 1 000 000 values (noncyclic record),
600 000 values (cyclic record) 
Recording interval 1s to 24 hours 
Display and alarm refresh 
each 10 s 
Recording mode  noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Available temperature units 
degrees Celsius, degrees Fahrenheit 
Communication interface 
Ethernet, USB, RS232 
Ethernet communication protocols
WWW, SNMPv1, XML, DATALINK
Alarm protocols
E-Mail
Power 
AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)
Battery life 
3 - 4 weeks
Protection class
IP20
Dimensions without connectors 
178 x 95 x 37mm, without attached cables 
Weight including batteries
approx. 380 g 
Warranty 
3 years

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

8cf12ba0-ab45-4b34-9c53-54b236229fc1

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 82be3c2c-6ac3-4c87-8ae2-76fecc442fcd
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...