MULTILOGGER M1320 - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

Nacházíte se:

CONFIGURATOR

CONFIGURE AND REQUEST

29901

BBB

--%>

Battery powered datalogger M1320 with 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.s portable device.

The Multilogger is a battery operated datalogger capable of measuring and recording sensor and electrical values through its inputs.
Datalogger can be connected to Ethernet. Then measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.

Included in delivery:

M1320
Instruction Manual
Traceable Calibration Certificate
3x Rechargeable Battery AA
Power Supply
USB Cable
Wall Holder
FREE Analytical Software COMET Vision

Accessories

Technické parametry

Temperature sensor	External probe PT 1000
Measuring range	-200 to +600 °C
Accuracy	±0.2 °C (-200 to +100 °C); ±0.2 % from reading from +100 to +600 °C
Resolution	0.1 °C

Temperature + humidity sensor	External probe T + RH digi
Measuring range	according to the connected probe Digi/M
Accuracy	according to the connected probe Digi/M
Resolution	0.1 °C

Dew point
Measuring range	according to the connected probe Digi/M
Accuracy	according to the connected probe Digi/M
Resolution	0.1 °C

DC Voltage
Measuring range	0 to 10 V
Accuracy	±10 mV
Resolution	better than 100 µV

DC Current
Measuring range	0 to 20 mA
Accuracy	±20 µA
Resolution	better than 0,1 µA

Binary signal
Input voltage for level “switched on”	<0,4 V/> 2 V
Minimum/maximum input voltage	0 V/+30 V DC
Impedance of the “switched on”	< 10 kOhm/> 300 kOhm

Counter input
Range of counter	24 bit (16 777 215) the counter overflow can be allowed
Maximum input frequency	200 Hz

Datalogger type	M1320
Operating temperature	-10 to +60 °C
Channels	2x external temperature probe or connectable temperature+humidity probe, 2x binary, counter, voltage and current input
Counted values	dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory	1 000 000 values (noncyclic record), 600 000 values (cyclic record)
Recording interval	1s to 24 hours
Display and alarm refresh	each 10 s
Recording mode	noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
Available temperature units	degrees Celsius, degrees Fahrenheit
Communication interface	Ethernet, USB, RS232
Ethernet communication protocols	WWW, SNMPv1, XML, DATALINK
Alarm protocols	E-Mail
Power	AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)
Battery life	3 - 4 weeks
Protection class	IP20
Dimensions without connectors	178 x 95 x 37mm, without attached cables
Weight including batteries	approx. 380 g
Warranty	3 years

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer

Rozměrový náčrt

Schéma zapojení

Modifikace

Obrázek k produktu:

MULTILOGGER M1320 - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

CONFIGURATOR

CONFIGURE AND REQUEST

Technické parametry

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

Spodní odkazy

Spodní odkazy

Spodní odkazy

Kontakty

Vaše firma s.r.o.

CONTACT

PRODUCTS

QUICK LINKS

NEWSLETTER