extend your senses
KOS
KIT - GSM/GPRS MODEM LP040 WITH ACCESSERIES FOR Sxxxx, Rxxxx LOGGERS

KIT - GSM/GPRS MODEM LP040 WITH ACCESSERIES FOR Sxxxx, Rxxxx LOGGERS

KIT - GSM/GPRS MODEM LP040 WITH ACCESSERIES FOR Sxxxx, Rxxxx LOGGERS
On request

BBB

--%>

Kit for easy ordering contains:

  • LP012 - COM adapter
  • LP040 - GSM/GPRS modem
  • MP009/1 - Antenna 3dB for modem
  • A1940 - Ac/dc adapter for modem
  • QMS2901 - Cable for modem setting 

FEATURES: 1. Wireless communication with Sxxxx, Rxxxx loggers via GPRS

  • Remote data download from logger
  • Logger configuration (setting, erasing of data, etc.)
  • Reading of actual values (online display mode)
  • All actions available as via COM/USB adapter
  • Connection realised via M2M Talk server
  • Communication via M2M server can be disabled, if data download is not required = saving of cost (no need to pay data tariff)

2. SMS queries about actual values

  • Sending of SMS query to modem telephone number returns actual values. After receiving of SMS query modem sends by return required info in SMS message.
  • It is possible to limit phone numbers SMS commands are sent from. Same it is also for configuration-service SMS commands.

3. Alarm SMS messages - modem sends to phone numbers alarm SMS messages

  • If upper/lower limit of measured value is exceeded
  • Information on filling of the logger memory (90% and 100%)
  • Information on low logger battery or end of estimated battery approaches.
  • Information on logger on/off.
  • Error messages (communication error with logger, internal clock error, measured value error)

4. Setting of modem a) Local - service setting via RS232 link from user program:

Setting of configuration

  • Download and erasing of diagnostic log file from modem
  • Upload of new firmware to modem

b) Remote - via M2MTalk server from user program

  • Setting of configuration
  • Download and erasing of diagnostic log file from modem
  • Log out from M2MTalk server
  • Restart of modem

c) By means of SMS message

  • Update of application in modemu
  • Detection of description and firmware version in GPRS modem
  • Detection of GSM status
  • Enable/disable of alarm evaluation
  • Setting of GPRS parameters for connection
  • Setting of parameters of M2MTalk server
  • Log in and log out with M2MTalk server
  • Halting of application in modem
  • Restart of application in modem

 

Technické parametry

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

3ec28b76-c781-4866-86f6-6214b5275fcc

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 3b8f4d92-c16e-4bd1-8fde-0d5e42736a64
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...