extend your senses
KOS
JPTS 41 thermowell
inside diameter 6.3 mm
for the sensors up to 400 °C

JPTS 41 thermowell
inside diameter 6.3 mm
for the sensors up to 400 °C

JPTS 41 thermowell
inside diameter 6.3 mm
for the sensors up to 400 °C

CONFIGURATOR

CONFIGURE AND REQUEST

21623
__KOUPIT__
__NABIDKA__
__JINY DOTAZ__

BBB

--%>

JPTS 41 thermowells are component parts that are usually screwed in or welded in a pipe line. They protect the measuring part of the sensors against the influence of the liquid being measured. Thermowells enable the replacement of the temperature sensors while the technological equipment is in operation.

All of the thermowell types manufactured by SENSIT s.r.o. are made of high-quality stainless steel DIN 1.4301. They are standardly provided with G1/2" thread, but is also possible to deliver them with the G 3/8", M 20 x 1.5, M 27 x 2 threads or even others if necessary.

JPTS 41 thermowell are designed for platinum temperature sensors up to 400 °C, PTS 41, PTS 43, PTS 45 , PTS 51, PTS81.

In addition to the standard lenghts listed in catalogues, thermowhells can also be manufactured in non-standard lenghts.

Temperature sensors are locked in the thermowhell with a M4 x 10 screw.

Thermowhells are manufactured for the nominal pressure PN 63.

Technické parametry

MAXIMUM STREAM VELOCITY OF THE MEASURED MEDIUM - AIR AND WATER VAPOUR / WATER [m.s-1]

Thermowell diameter (mm) /
Thermowell length (mm)

up to 60 > 60 to 100 > 100 to 160 > 160 to 220 > 220 to 400
∅6 and ∅ 8 20 / 2.0 15 / 1.5 8.0 / 1.0 2.5 / 0.6 0.6 / 0.3
∅ 10 and ∅ 12 35 / 3.5 30 / 3.0 15 / 2.0 5.0 / 1.2 1.6 / 0.8


Thermowell typeJPTS 41
Temperature range-100 to 450 °C
Thermowell material
stainless steel DIN 1.4301
Maximum diameter of the temperature stem
6.2 mm
Outer diameter of thermowell
10 mm
Standard length L2
50, 100, 160, 220, 280 and 400 mm
Standard thread
G 1/2"/OK24; M 20 x 1.5/OK24; M 27 x 2/OK30
Designed for sensorplatinum temperature sensors up to 400 °C, PTS 41, PTS 43, PTS 45 , PTS 51, PTS81

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.


Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

040.11en.pdf 040.11en.pdf

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

ab9c43ef-3875-4498-b649-c027c8882609

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 4bbc2e3a-d284-4a8c-918f-cf0817aa7007
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...