extend your senses
KOS
Electromotor stator slot
temperature sensor TR 097V

Electromotor stator slot
temperature sensor TR 097V

-40 to 180 °C

Electromotor stator slot
temperature sensor TR 097V
On request

BBB

--%>

These resistance temperature sensors  and thermocouple temperature sensors, are designed to measure the temperature of gaseous or solid substances. The temperature range in working mode is -40 to 180 °C - temperature class H. The sensors can be used for any control systems compatible with the types of sensing elements or output signals listed in the table of technical parameters. The sensors meet the ingress protection of IP 65 according to EN 60 529, as amended. The temperature sensor is placed in a special plastic case from SCID - sklotextit material ensuring high electric strength – the sensors meet the requirements on electric strength of 5.0 kV DC and can therefore be used also for measuring the temperature of electric motor windings, etc.

The sensors are designed to be operated in a chemically non-aggressive environment. The use must be chosen with regard to the temperature, chemical and mechanical resistance of the temperature sensor.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaratin of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.  

Technické parametry

Sensor type TR 097V
Temperature range -40 to 180 °C temperature class H
Type of sensing element* all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY, TSiC, DALLAS, TC K, TC J, TC T and so on)
Ingress protection IP 65 in accordance with EN 60 529, as amended
Electric strenght 5 kV (higher acc. to requirement)
Case dimension 63 x 6 x 1.7 mm (other acc. to requirements)
Case material SCID - sklotextit
Lead in cable 0.14 mm2 - teflon FEP or PFA
Wire resistance 0.254 Ω / m at 25 °C

*) Certain technical specifications of thermocouple sensors (lead wires, IP rating, etc.) may differ with different types.
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

K37.02en.pdf K37.02en.pdf
1
 
2
 
3
*
 
4
*

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

cd54a380-cc23-4e20-9049-9420ccd5aaba

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 9dd1a64b-48b6-449b-8a6c-f139c50036aa
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...