extend your senses
KOS
TEMERATURE SENSORS WITH CORRECTION OF THE REQUESTED VALUE SAU 1000

TEMERATURE SENSORS WITH CORRECTION OF THE REQUESTED VALUE SAU 1000

TEMERATURE SENSORS WITH CORRECTION OF THE REQUESTED VALUE SAU 1000

CONFIGURATOR

CONFIGURE AND REQUEST

20917
__KOUPIT__
__NABIDKA__
__JINY DOTAZ__

BBB

--%>

The SAU 1000 control modules are intended to measure air temperature in water protected rooms. In addition to measuring temperature they enable to correct the requested value. These sensors are encapsulated in a plastic case, in which the temperature sensing element and a potentiometer are situated. Based on the measured temperature information an adjustment in the control system can be done, resulting in temperature increase or decrease.

Both control module types are enclosed in TANGO boxes made by ABB elektro, and as such they are a suitable supplement to wall switches, sockets, sensors and further elements of this series.

The sensors are designed to be operated in a chemically non-aggressive environment.

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

 

Technické parametry

SAU 1000
Type of sensing element Ni 1000/5000, Ni 1000/6180, Ni 891, Ni 10000/6180, Pt 100, Pt 500, Pt 1000, NTC 20 kΩ etc.
Accuracy class Ni sensing elements: B class, Δt = ± (0.4+0.007t), for t ≥ 0; Δt = ± (0.4 + 0.028|t|) for t ≤ 0 in °C
Pt sensing elements: B class according to EN 60751, Δt = ± (0.3 + 0.005|t|) in °C
NTC 20 kΩ: ± 1 °C for the range of 0 to 70 °C
Maximum measuring DC current Pt 100 - 3 mA; Pt 500 - 1.5 mA; Pt 1000, Ni 1000, Ni 891 - 1 mA; T1 = Ni 2226 - 0.7mA; Ni 10000 - 0.3 mA; NTC 20 kΩ - maximum power dissipation 1 mW
Correction range Basic version: 0 to 250 Ω
Possible option:
0 to 10 Ω
0 to 100 Ω
0 to 22kΩ/G
0 to 2.5 kΩ
Sensor connection according to the wiring diagram
Time response τ0,5 < 15 s (in flowing air at 1m.s -1)
Type of terminal board MEB 02001, ARK 500/3 - wire cross section 0.35 to 1.5 mm2
Ingress protection IP 30 in accordance with EN 60529
Temperature range -30 to 70 °C
Dimmensions of the box 81 x 81 x 28 mm
Material of the box ABS
Working conditions ambient temperature: -30 to 70 °C
relative humidity: max. 85% (at the ambient temperature 25 °C )
atmospheric pressure: 87 to 107 kPa
Weight approximately 0.15 kg



Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.


Rozměrový náčrt

Schéma zapojení

Modifikace

Soubory ke stažení

067.12en.pdf 067.12en.pdf
1
 
2
 
3
*
 
4
*

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

15052528-0b16-4a72-91a2-2c7c8ea667d4

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 355c665f-b175-4553-8ff4-da210afea919
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...