extend Your senses
sitemap
cz en Lithuania
A selected group of goods  Products »

TR 080A
diameter 4 mm, -30 °C to 180 °C

Description and application

TR 080A
diameter 4 mm, -30 °C to 180 °C

These resistance sensors are designed to measure the temperature of gaseous, liquid or solid substances. The maximum temperature range of use of the sensors is -30 to 180 °C. Used type of lead-in case has silicone insulation and shielding. The sensors are primarily designed for measuring the temperature in air-contitioning ducts. The 4 mm case diameter enables quicker response to changes in temperature. the sensors are designed for use in a chemically non-aggressive environment. The method of use must be chosen with regard to the temperature and chemical re- sistance of the case and lead-in cable.

ACCESORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaratin of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

 


  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Přiložené soubory

Sensor type TR 080A
Measuring range
-30 to 180 °C (can be limited by the sensing element, determine in documentation)
Type of sensing element Ni 1000, Pt 100, Pt 500, Pt 1000, NTC
Ingress protection IP 65 in accordance with EN 60529
Thread / OK according to customer
Case material stainless steel DIN 1.4301
Diameter of case
4 mm
Length of case L 40 to 200 mm
Lead-in cable shielded silicone 2 x 0.22 mm2
shielded silicone 4 x 0.15 mm2
Wire resistance 0.16Ω for 1 m of cable for 2-wire connection
Time response
τ0.5 < 5 s (in flowing water 0.4 m.s-1)

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - TEMPERATURE SENSORS TR 080A
Datasheet - TEMPERATURE SENSORS TR 080ADatasheet - TEMPERATURE SENSORS TR 080A
Schéma zapojení
Rozměrový náčrt

Back to category