extend Your senses
sitemap
cz en Lithuania
A selected group of goods  Products »

TG 68
diameter 6 mm, -50 °C to 200 °C

Description and application

TG 68
diameter 6 mm, -50 °C to 200 °C

These resistance sensors are designed to measure the temperature of gaseous and liquid substances. The maximum temperature range of use of the sensors is -50  to 200 °C for the model with a silicone cable and -40 to 105 °C for the model with a PVC cable. Used type of lead-in cable has silicone insulation and shielding. The diameter of the case also enables the encasement of special temperature sensors – KTY, SMT 160, DS 18B20, TSic etc. In combination with a thermowell, the sensors meet the ingress protection of IP 68 (1 bar) in accordance with EN 60 529 and are designed for measuring the temperature below the surface of water for continuous immersion at a depth of up to 5 m. The method of use must be chosen with regard to the temperature and chemical resistance of the case and supply cable.

Temperature sensors meet requirements IP 68 (1 bar) in accordance with EN 60529.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

 


  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Přiložené soubory

Sensor type TG 68
Measuring range -40 to 105 °C PVC cable,
-50 to 200 °C silicone cable
Type of sensing element all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY,
TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Ingress protection IP 68 (1 bar) in accordance with EN 60529
Case material stainless steel DIN 1.4301
Length of case L 60 mm
Diameter of case 6 mm
Lead-in cable
shielded silicone 2 x 0.34 mm2 or 4 x 0.22 mm2
unshielded PVC 2 x 0.35 mm2 or 4 x 0.35 mm2
Wire resistance 0.11 Ω for 1 m of cable for 2-wire connection
Time response τ0.5 < 12 s (in flowing water at 0.2 m.s-1)
τ0.9 < 35 s (in flowing water at 0.4 m.s-1)

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - CABLE TEMPERATURE SENSOR TG 68
Datasheet - CABLE TEMPERATURE SENSOR TG 68Datasheet - CABLE TEMPERATURE SENSOR TG 68
Schéma zapojení
Rozměrový náčrt

Back to category