extend Your senses
cz en Lithuania
A selected group of goods  Products »

TR 152
diameter 8 mm, -20 °C to 105 °C

Description and application

TR 152
diameter 8 mm, -20 °C to 105 °C

Temperature sensors TR 152 in the plastic case are intended for temperature measurements of gaseous, eventually liquid materials. For long-lasting temperature measurements (especially at the temperatures over 90 °C) there is better to use the sensor with thermowell-combination. The sensors have always plastic polyamid case in which the temperature sensing element is located.

The diameter of the case TR 152 is 8 mm. All types of thin layer resistence-type sensing elements made by company SENSIT s.r.o. can be used. The wiring of the sensors is always 2-wire.

Material of the case has medium resistivity to atmospheric aging, it resists oils, fuels, hydraulic liquids, alifatic and aromatic hydrocarbons, esters, ketons and slight alcalis. Material is not resistant to acids, strong alcalis and chlorinated hydrocarbons.


  • Manufacturer provides EU Declaration of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download
Sensor type TR 152
Measuring range
-20 to 105 °C (can be limited bythe type of cable, determine in documentation)
Type of sensing element all types
Ingress protection IP 67 in accordance with EN 60529
Case material on the base of POLYAMIDE
Diameter of case 8 mm
Length of case L 30 mm
Lead-in cable PVC unshielded 2 x 0.35 mm2 up to 105 °C
PVC shielded 2 x 0.25 mm2 up to 80 °C
Wire resistance 0.105 Ω for 1 m of cable for 2-wire connection PVC up to 105 °C
0.159 Ω for 1 m of cable for 2-wire connection PVC up to 80 °C
Time response τ0.9 ≤ 75 s (in flowing water > 0.2 m.s-1)

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Schéma zapojení
Rozměrový náčrt

Back to category