extend Your senses
sitemap
cz en Lithuania
A selected group of goods  Products »

TG 7
brass -50 °C to 200 °C

Description and application

TG 7
brass -50 °C to 200 °C

These resistance sensors are designed to measure the surface temperature of solid substances. The maximum temperature range of use of the sensors is -50 °C to 200 °C and these limits must not be exceeded even for a brief period. The structure of the sensors enables fast response to changes in temperature, in particular when silicone grease or thermally conductive paste is applied between the measured surface and the sensor. The sensors are mounted to the surface using one or two M4 screws. the sensors are designed for use in a chemically non-aggressive environment.

The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • EU Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download

Sensor type TG 7
Measuring range
-50 °C to 200 °C (can be limited by the sensing element, determine in documentation)
Type of sensing element Pt, Ni, NTC, TCx
Ingress protection IP 65 in accordance with EN 60 529
Case material brass
Case dimensions Ø 19 15 mm, height 6 mm
Lead-in cable shielded silicone 2 x 0.22 mm2
shielded silicone 4 x 0.15 mm2
Wire resistance
0.16 Ω for 1 m of cable for 2-wire connection
Time response
τ0.5 < 7 s (on flat surface of Al prism without paste)
Maximum allowable
cable tension
2 kg
Recommendation use thermal conductive paste for installation

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - TEMPERATURE SENSORS TG 7
Datasheet - TEMPERATURE SENSORS TG 7Datasheet - TEMPERATURE SENSORS TG 7
Schéma zapojení
Rozměrový náčrt

Back to category