extend Your senses
sitemap
cz en Lithuania
A selected group of goods  Products »

Electromotor stator slot
temperature sensor TR 097V

Description and application

Electromotor stator slot
temperature sensor TR 097V

The TR097V resistance temperature sensors are designed to measure the temperature of gaseous or solid substances. The temperature range in working mode is -40 °C to 180 °C - temperature class H. The sensors can be used for any control systems compatible with the types of sensing elements or output signals listed in the table of technical parameters. The sensors meet the ingress protection of IP 65 according to EN 60 529. The temperature sensor is placed in a special plastic case from SCID - sklotextit material ensuring high electric strength – the sensors meet the requirements on electric strength of 5.0 kV DC and can therefore be used also for measuring the temperature of electric motor windings, etc.

The sensors are designed to be operated in a chemically non-aggressive environment. The use must be chosen with regard to the temperature, chemical and mechanical resistance of the temperature sensor.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • Manufacturer provides EU Declaratin of Conformity.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download
Sensor type TR 097V
Temperature range -40 to 180 °C temperature class H
Type of sensing element all types
(Pt 100, Pt 1000, Ni 1000, Ni 10000,Ni 2226=T1, NTC, PTC, KTY,
TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Ingress protection IP 65 in accordance with EN 60 529
Electric strenght 5 kV (higher acc. to requirement)
Case dimension 63 x 6 x 1.7 mm (other acc. to requirements)
Case material SCID - sklotextit
Lead in cable 0.14 mm2 - teflon FEP or PFA
Wire resistance 0.254 Ω / m at 25 °C

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - TEMPERATURE SENSORS TR 097V
Datasheet - TEMPERATURE SENSORS TR 097VDatasheet - TEMPERATURE SENSORS TR 097V
Schéma zapojení
Rozměrový náčrt

Back to category