Temperature sensors for machines and equipment
We consider the ability to provide low-volume or unit production as a major benefit of our company, SENSIT s.r.o. This advantage is mainly used by our customers – manufacturers of machines and equipment. We can produce made-to-order temperature sensors, which meet the requirements of the respective manufactur- ers to the maximum, in terms of both technical and structural aspects. Moreover, we can ensure replacements for temperature sensors on the basis of drawings or submitted samples.
Our experience allows us to flexibly react to the requirements of customers and thus ensure smooth development without any time delays.
SENSIT s.r.o. has its own calibration laboratory. We provide calibration from -60°C to 600°C, including the calibration of thermocouples.
Custom made design of temperature sensors, we perform type tests of the following technical parameters:
- insulation resistance in increased temperatures
- temperature response time
- impact of hysteresis
- minimum immersion depth
- thermoelectric voltage
- effect of temperature cycling
- resistance accuracy test
- stability on the upper limit of the temperature range, etc.
Our company provides product certificates on demand (sensor resistance to impacts and vibrations, electric strength, IP 68 etc.). We work together with qualified, certified laboratories and test rooms.
THE MOST COMMONLY USED STANDARD TEMPERATURE SENSOR WITH A CONNECTION HEAD
Temperature sensors up to 600 °C
Temperature sensors up to 400 °C
Temperature sensors up to 250 °C
Stainless steel temperature sensors
THE MOST COMMONLY USED STANDARD TEMPERATURE SENSOR WITH A CABLE
Temperature sensors with a smooth case
Contact temperature sensors
Temperature sensors with a thread
Temperature sensors with bayonet
CUSTOM MADE TEMPERATURE SENSORS
After performing an analysis of your requirements, together we will propose a suitable temperature sensor for you and recommend optimal application so that potential interferences associated with implementing a sensor are eliminated or suppressed. When developing a new temperature sensor, we offer you:
1/ Cooperation, our experience and help for progress of suitable sensor for your application. The personal negotiation of our technician in your company.
2/ Provision of the required certification, declaration in accordance with ap- plicable standards in Czech, English, Russian, German and other languages.
3/ Design and production of temperature sensors„in customs case“
- Production of sensors according samples or drawings
- Modification of the standard cases
- Production of sensor with difficult and unusual case design
- Production of sensor with small case diameter 2-3 mm
- Proposing of assembly according application
4/ Encapsulation of special sensing element
- SMT 160
- Two and more elements to case (same & different)
5/ Sensors compliant with special requirement for:
- Resistant to vibration and shock
- High resistance to abrasive action
- Use the cryogenic temperatures
- Frequent repeatbility and stability
- The required high accuracy
- požadovanou vysokou přesnost
- Execution and compliance standards (test) el. strenght ans puncture
- Very fast response temperature change
6/ Standard used special materials are replaced according to your require- ments. In areas such as housing material:
- Tin bronze CuSn9
- Plastics - makromelt
- Aluminium (alloy)
- Stainless steel 1.4571
For cable, shrinking tubes:
- Flame retardant cable – FM 4910
- The cables for application under soil and so on
Enquiry web – machine and equipments