Temperature sensors with connection head for explosion endangered rooms

Ni 891, Ni 1000, NTC 20kΩ, Pt 100, Pt 500, Pt 1000

The temperature sensors are designed to meet the requirements of EN 60 079- 15:2006 standard. They operate on the base of defined relationship between change of sensing element resistance and change of temperature. They are not able to form sparkles, electric arcs or high surface temperatures. The sensors that are identified on the type label by II 3G Ex nA II T6 code can be utilised in explosion endangered rooms, device group II, zone 2. The operating temperature range for using them in zone 2 is -20 °C to 80 °C. These limits must not be exceeded even for a short time. According to the location of the sensing element and utilization of the sensors there are following versions:

Serie S 110 - temperature sensors for outdoor usage. Temperature sensing element is located in a metal stem of the 25 mm length, delivering with a plastic side holder.
Certificate FTZÚ 07 ATEX 0246X

Serie S 120 - temperature sensors for using in air condition ducts or tubing. the sensing element is located in a metal stem of the standard length of 70, 120, 180 a 240 mm; it is delivered with a plastic holder, optionally the stainless steel thermowell JS 130 can be delivered.
Certificate FTZÚ 07 ATEX 0247X

Serie S 140 - contact version for measurement on piping. Sensing element is located in the metal measure case protecting by protect case made of SILIKON and SILAMID. Delivering with fastening strap (length 40 cm) and closing device.
Certificate FTZÚ 07 ATEX 0249X

Serie S 160 - Fast response temperature sensors used in piping. Sensing element is located in a case the part of which is also screwing (thread G ½“, M 20x1,5) which makes possible to assembly directly in piping.
Certificate FTZÚ 07 ATEX 0251X

Fast response temperature sensors used in piping. Sensing element is located in a case the part of which is also screwing (thread G ½“, M 20 x 1,5) which makes possible to assembly directly in piping.

The plastic head is made of LEXAN 500R. The sensors meet the ingress protection requirements IP 65 according to en 60529. The head is provided by a cable ending or a connector. The sensors are designed to be operated in a chemically non-aggressive environment and they can be installed in places with low risk of mechanical stress. 

Used sensing elements: Ni 1000/5000, Ni 1000/6180, Ni 891, Pt 100/3850, Pt 500/3850, Pt 1000/3850, thermistor NTC 20kΩ.

			Temperature sensors with connection head for explosion endangered rooms - prospectus
			Type certificate - Case of cable temperature sensor (with a cable or head) / type PN 25
			Type certificate - Case of cable temperature sensor (with a cable or head) / type PN 63
			Model xxS 110 Temperature sensor – ATEX Certificate
			Model xxS 120 Temperature sensor – ATEX Certificate
			Model xxS 140 Temperature sensor – ATEX Certificate
			Model xxS 160 Temperature sensor – ATEX Certificate
			EU-EC Declaration - S 110
			EU-EC Declaration - S 110K
			EU-EC Declaration - S 120
			EU-EC Declaration - S 120K
			EU-EC Declaration - S 140
			EU-EC Declaration - S 140K
			EU-EC Declaration - S 160
			EU-EC Declaration - S 160K