These resistance-type sensors are intended for contact temperature measurements of liquid and gaseous substances. The sensor consists of a plastic connection head and a metal measuring stem with a diameter of 4 mm the part of which is a G 1/2” screwed joint. The sensor stem is made of the stainless steel EN X5CrNi18-10 (DIN 1.4301). The basic lengths of the measuring stems are 50, 100, 160 and 220 mm. The plastic connection head is provided with a cable outlet ending (the terminal board is placed inside the connection head) or with a connector. All these sensor types meet the IP 65 ingress protection requirements according to the EN 60 529 standard. Connector ELKA4012 or lead-in cables whith the straight RKT connector or the rectangular-type RKWT connector can be delivered as accessories for the version with connector.
The structure of the sensor stem makes it possible to utilise the sensor for direct temperature measurements in tubing, and provides for a fast sensor response to temperature changes. The sensors can be utilised for any control system that is compatible with sensing elements or active output signals quoted in the sensing element specification table.
The standard temperature range in which the sensors are allowed to be utilised is -30 to +130 °C. The sensors are designed to be operated in a chemically non-aggressive environment.
Used sensing elements: Ni 1000/5000, Ni 1000/6180, Ni 891, Pt 100/3850, Pt 500/3850, Pt 1000/3850, thermistor NTC 20kΩ.
||Fast response temperature sensors - prospectus|
|EU-EC Declaration - NS 560|
|EU-EC Declaration - NS 560K|
|EU-EC Declaration - NS 760|
|EU-EC Declaration - NS 760K|
|Type certificate - Case of cable temperature sensor (with a cable or head) / type PN 25|
|Certificate GOST R|
|Certificate GOST R - Enclosure 1
|Certificate GOST R - Enclosure 2