TP 13 and TP 13A paired temperature sensors

Pt 100, Pt 500, Pt 1000

These paired temperature sensors are used as component parts of the electrical heat quantity meters. They meet the requirements of the IEC 751 and EN 1434 standards and they have the EU certificate - type approval identification TCM 321/07-4530. They are produced with the Pt 100, Pt 500 and Pt 1000 temperature sensing elements and consist of a case, in which the resistance-type sensing element is encapsulated, and a lead-in cable provided with a silicone insulation and a shielding.

The sensor cases are made of the stainless steel EN X5CrNi18-10 (DIN 1.4301) and are produced with the diameter 3,6 mm (TP 13) or 5 mm (TP 13A). The fixing nut, which forms the sensor's component part, is made of brass. All dimensions and tolerances are in correspondence with the requirements of the EN 1434 standard. The resistance-type sensing elements are connected by means of 2-wire or 4-wire connection. the TEMASIL sealing is available optionally.

The sensor case construction makes it possible to install the sensor directly into a tubing without the necessity to use a thermowell, thus providing for a fast sensor response to temperature changes. The sensors are designed to operate in a chemically non-aggressive environment. The standard operating temperature range is 0 to 180 °C or 0 to 150 °C. The sensors are produced in accordance with the council Directive 2004/22/EEC for measure devices that was implemented to the legal system of the czech Republic by the government regulation no. 464/2005 col.

Used sensing elements: Pt 100, Pt 500, Pt 1000.

			TP 13 and TP 13A paired temperature sensors - prospectus
			EU-EC Declaration - TP 13
			Certificate GOST R
			Certificate GOST R - Enclosure 1
			Certificate GOST R - Enclosure 2